fix device ports

test/experiments/comprehensive_protocol/comprehensive_station.json

@@ -730,7 +730,7 @@
             "type": "fluid",
             "port": {
                 "multiway_valve_2": "2",
-                "solenoid_valve_1": "1"
+                "solenoid_valve_1": "in"
             }
         },
         {
@@ -739,7 +739,7 @@
             "target": "vacuum_pump_1",
             "type": "fluid",
             "port": {
-                "solenoid_valve_1": "2",
+                "solenoid_valve_1": "out",
                 "vacuum_pump_1": "vacuumpump"
             }
         },
@@ -750,7 +750,7 @@
             "type": "fluid",
             "port": {
                 "multiway_valve_2": "3",
-                "solenoid_valve_2": "1"
+                "solenoid_valve_2": "in"
             }
         },
         {
@@ -759,7 +759,7 @@
             "target": "gas_source_1",
             "type": "fluid",
             "port": {
-                "solenoid_valve_2": "2",
+                "solenoid_valve_2": "out",
                 "gas_source_1": "gassource"
             }
         },

test/experiments/mock_reactor.json

@@ -122,39 +122,39 @@
     ],
     "links": [
         {
-            "source": "reactor",
+            "source": "vacuum_valve",
-            "target": "vacuum_valve",
+            "target": "reactor",
-            "type": "physical",
+            "type": "fluid",
             "port": {
                 "reactor": "top",
-                "vacuum_valve": "1"
+                "vacuum_valve": "out"
             }
         },
         {
-            "source": "reactor",
+            "source": "gas_valve",
-            "target": "gas_valve",
+            "target": "reactor",
-            "type": "physical",
+            "type": "fluid",
             "port": {
                 "reactor": "top",
-                "gas_valve": "1"
+                "gas_valve": "out"
             }
         },
         {
-            "source": "vacuum_pump",
+            "source": "vacuum_valve",
-            "target": "vacuum_valve",
+            "target": "vacuum_pump",
-            "type": "physical",
+            "type": "fluid",
             "port": {
                 "vacuum_pump": "out",
-                "vacuum_valve": "0"
+                "vacuum_valve": "in"
             }
         },
         {
-            "source": "gas_source",
+            "source": "gas_valve",
-            "target": "gas_valve",
+            "target": "gas_source",
-            "type": "physical",
+            "type": "fluid",
             "port": {
                 "gas_source": "out",
-                "gas_valve": "0"
+                "gas_valve": "in"
             }
         }
     ]

unilabos/app/register.py

@@ -0,0 +1,63 @@
+import argparse
+import time
+
+from unilabos.registry.registry import build_registry
+
+from unilabos.app.main import load_config_from_file
+from unilabos.utils.log import logger
+
+
+def register_devices_and_resources(mqtt_client, lab_registry):
+    """
+    注册设备和资源到 MQTT
+    """
+    logger.info("[UniLab Register] 开始注册设备和资源...")
+
+    # 注册设备信息
+    for device_info in lab_registry.obtain_registry_device_info():
+        mqtt_client.publish_registry(device_info["id"], device_info)
+        logger.debug(f"[UniLab Register] 注册设备: {device_info['id']}")
+
+    # 注册资源信息
+    for resource_info in lab_registry.obtain_registry_resource_info():
+        mqtt_client.publish_registry(resource_info["id"], resource_info)
+        logger.debug(f"[UniLab Register] 注册资源: {resource_info['id']}")
+
+    time.sleep(20)
+
+    logger.info("[UniLab Register] 设备和资源注册完成.")
+
+
+def main():
+    """
+    命令行入口函数
+    """
+    parser = argparse.ArgumentParser(description="注册设备和资源到 MQTT")
+    parser.add_argument(
+        "--registry_path",
+        type=str,
+        default=None,
+        action="append",
+        help="注册表路径",
+    )
+    parser.add_argument(
+        "--config",
+        type=str,
+        default=None,
+        help="配置文件路径，支持.py格式的Python配置文件",
+    )
+    args = parser.parse_args()
+
+    # 构建注册表
+    build_registry(args.registry_path)
+    load_config_from_file(args.config)
+
+    from unilabos.app.mq import mqtt_client
+    from unilabos.registry.registry import lab_registry
+
+    # 注册设备和资源
+    register_devices_and_resources(mqtt_client, lab_registry)
+
+
+if __name__ == "__main__":
+    main()

unilabos/registry/devices/pump_and_valve.yaml

@@ -48,12 +48,14 @@ solenoid_valve.mock:
         feedback: {}
         result: {}
   handles:
-    - handler_key: 0
+    - handler_key: in
-      label: 0
+      label: in
+      io_type: target
       data_type: fluid
       side: NORTH
-    - handler_key: 1
+    - handler_key: out
-      label: 1
+      label: out
+      io_type: source
       data_type: fluid
       side: SOUTH
   init_param_schema:

unilabos/registry/devices/virtual_device.yaml

@@ -107,10 +107,10 @@ virtual_pump:
           success: success
   # 虚拟泵节点配置 - 具有多通道阀门特性，根据valve_position可连接多个容器
   handles:
-  - handler_key: pump-inlet
+  - handler_key: pumpio
-    label: Pump Inlet
+    label: pumpio
     data_type: fluid
-    io_type: target
+    io_type: source
     data_source: handle
     data_key: fluid_in
     description: "泵的进液口，连接源容器"
@@ -168,7 +168,7 @@ virtual_stirrer:
     label: stirrer
     data_type: mechanical
     side: NORTH
-    io_type: undirected
+    io_type: source
     data_source: handle
     data_key: vessel
     description: "搅拌器的机械连接口，直接与反应容器连接提供搅拌功能"
@@ -323,19 +323,19 @@ virtual_solenoid_valve:
           success: success
   # 电磁阀门节点配置 - 双向流通的开关型阀门，流动方向由泵决定
   handles:
-  - handler_key: 1
+  - handler_key: in
-    label: 1
+    label: in
     data_type: fluid
     side: NORTH
-    io_type: undirected
+    io_type: target
     data_source: handle
     data_key: fluid_port_in
     description: "电磁阀的双向流体口，开启时允许流体双向通过，关闭时完全阻断"
-  - handler_key: 2
+  - handler_key: out
-    label: 2
+    label: out
     data_type: fluid
     side: SOUTH
-    io_type: undirected
+    io_type: source
     data_source: handle
     data_key: fluid_port_out
     description: "电磁阀的双向流体口，开启时允许流体双向通过，关闭时完全阻断"
@@ -391,7 +391,7 @@ virtual_centrifuge:
     label: centrifuge
     data_type: transport
     side: NORTH
-    io_type: undirected
+    io_type: target
     data_source: handle
     data_key: vessel
     description: "需要离心的样品容器"
@@ -534,7 +534,7 @@ virtual_heatchill:
     label: heatchill
     data_type: mechanical
     side: NORTH
-    io_type: undirected
+    io_type: source
     data_source: handle
     data_key: vessel
     description: "加热/冷却器的物理连接口，容器直接放置在设备上进行温度控制"
@@ -593,7 +593,7 @@ virtual_transfer_pump:
     label: transferpump
     data_type: fluid
     side: SOUTH
-    io_type: undirected
+    io_type: source
     data_source: handle
     data_key: fluid_port
     description: "注射器式转移泵的唯一连接口，通过阀门切换实现吸入和排出"
@@ -716,7 +716,7 @@ virtual_rotavap:
     label: rotavap-sample
     data_type: fluid
     side: NORTH
-    io_type: undirected
+    io_type: target
     data_source: handle
     data_key: vessel
     description: "样品的双向连接口，可放入需要蒸发的样品，蒸发完成后取出浓缩物"
@@ -787,7 +787,7 @@ virtual_separator:
     label: separatorin
     data_type: fluid
     side: NORTH
-    io_type: undirected
+    io_type: target
     data_source: handle
     data_key: from_vessel
     description: "需要分离的混合液体输入口"
@@ -844,7 +844,7 @@ virtual_vacuum_pump:
     label: vacuumpump
     data_type: fluid
     side: SOUTH
-    io_type: target
+    io_type: source
     data_source: handle
     data_key: fluid_in
     description: "真空泵进气口，连接需要抽真空的容器或管路"

unilabos/registry/resources/organic/container.yaml

@@ -6,9 +6,16 @@ container:
   handles:
     - handler_key: top
       label: top
+      io_type: target
       data_type: fluid
       side: NORTH
     - handler_key: bottom
       label: bottom
+      io_type: source
       data_type: fluid
+      side: SOUTH
+    - handler_key: bind
+      label: bind
+      io_type: target
+      data_type: mechanical
       side: SOUTH

unilabos/resources/graphio.py

@@ -176,7 +176,7 @@ def modify_to_backend_format(data: list[dict[str, Any]]) -> list[dict[str, Any]]
         elif "target_port" in edge:
             edge["targetHandle"] = edge.pop("target_port")
         if "id" not in edge:
-            edge["id"] = f"link_generated_{source}_{target}"
+            edge["id"] = f"reactflow__edge-{edge['sourceHandle']}-{edge['targetHandle']}"
         for key in ["source_port", "target_port"]:
             if key in edge:
                 edge.pop(key)