1027by_Xinyu

unilabos/resources/bioyond/YB_bottle_carriers.py

@@ -0,0 +1,573 @@
+from pylabrobot.resources import create_homogeneous_resources, Coordinate, ResourceHolder, create_ordered_items_2d
+
+from unilabos.resources.itemized_carrier import Bottle, BottleCarrier
+from unilabos.resources.bioyond.YB_bottles import (
+    YB_jia_yang_tou_da,
+    YB_ye_Bottle
+)
+# 命名约定：试剂瓶-Bottle，烧杯-Beaker，烧瓶-Flask，小瓶-Vial
+
+
+def BIOYOND_Electrolyte_6VialCarrier(name: str) -> BottleCarrier:
+    """6瓶载架 - 2x3布局"""
+
+    # 载架尺寸 (mm)
+    carrier_size_x = 127.8
+    carrier_size_y = 85.5
+    carrier_size_z = 50.0
+
+    # 瓶位尺寸
+    bottle_diameter = 30.0
+    bottle_spacing_x = 42.0  # X方向间距
+    bottle_spacing_y = 35.0  # Y方向间距
+
+    # 计算起始位置 (居中排列)
+    start_x = (carrier_size_x - (3 - 1) * bottle_spacing_x - bottle_diameter) / 2
+    start_y = (carrier_size_y - (2 - 1) * bottle_spacing_y - bottle_diameter) / 2
+
+    sites = create_ordered_items_2d(
+        klass=ResourceHolder,
+        num_items_x=3,
+        num_items_y=2,
+        dx=start_x,
+        dy=start_y,
+        dz=5.0,
+        item_dx=bottle_spacing_x,
+        item_dy=bottle_spacing_y,
+
+        size_x=bottle_diameter,
+        size_y=bottle_diameter,
+        size_z=carrier_size_z,
+    )
+    for k, v in sites.items():
+        v.name = f"{name}_{v.name}"
+
+    carrier = BottleCarrier(
+        name=name,
+        size_x=carrier_size_x,
+        size_y=carrier_size_y,
+        size_z=carrier_size_z,
+        sites=sites,
+        model="Electrolyte_6VialCarrier",
+    )
+    carrier.num_items_x = 3
+    carrier.num_items_y = 2
+    carrier.num_items_z = 1
+    for i in range(6):
+        carrier[i] = YB_Solid_Vial(f"{name}_vial_{i+1}")
+    return carrier
+
+
+def BIOYOND_Electrolyte_1BottleCarrier(name: str) -> BottleCarrier:
+    """1瓶载架 - 单个中央位置"""
+
+    # 载架尺寸 (mm)
+    carrier_size_x = 127.8
+    carrier_size_y = 85.5
+    carrier_size_z = 100.0
+
+    # 烧杯尺寸
+    beaker_diameter = 80.0
+
+    # 计算中央位置
+    center_x = (carrier_size_x - beaker_diameter) / 2
+    center_y = (carrier_size_y - beaker_diameter) / 2
+    center_z = 5.0
+
+    carrier = BottleCarrier(
+        name=name,
+        size_x=carrier_size_x,
+        size_y=carrier_size_y,
+        size_z=carrier_size_z,
+        sites=create_homogeneous_resources(
+            klass=ResourceHolder,
+            locations=[Coordinate(center_x, center_y, center_z)],
+            resource_size_x=beaker_diameter,
+            resource_size_y=beaker_diameter,
+            name_prefix=name,
+        ),
+        model="Electrolyte_1BottleCarrier",
+    )
+    carrier.num_items_x = 1
+    carrier.num_items_y = 1
+    carrier.num_items_z = 1
+    carrier[0] = YB_Solution_Beaker(f"{name}_beaker_1")
+    return carrier
+
+
+def YB_6StockCarrier(name: str) -> BottleCarrier:
+    """6瓶载架 - 2x3布局"""
+
+    # 载架尺寸 (mm)
+    carrier_size_x = 127.8
+    carrier_size_y = 85.5
+    carrier_size_z = 50.0
+
+    # 瓶位尺寸
+    bottle_diameter = 20.0
+    bottle_spacing_x = 42.0  # X方向间距
+    bottle_spacing_y = 35.0  # Y方向间距
+
+    # 计算起始位置 (居中排列)
+    start_x = (carrier_size_x - (3 - 1) * bottle_spacing_x - bottle_diameter) / 2
+    start_y = (carrier_size_y - (2 - 1) * bottle_spacing_y - bottle_diameter) / 2
+
+    sites = create_ordered_items_2d(
+        klass=ResourceHolder,
+        num_items_x=3,
+        num_items_y=2,
+        dx=start_x,
+        dy=start_y,
+        dz=5.0,
+        item_dx=bottle_spacing_x,
+        item_dy=bottle_spacing_y,
+
+        size_x=bottle_diameter,
+        size_y=bottle_diameter,
+        size_z=carrier_size_z,
+    )
+    for k, v in sites.items():
+        v.name = f"{name}_{v.name}"
+
+    carrier = BottleCarrier(
+        name=name,
+        size_x=carrier_size_x,
+        size_y=carrier_size_y,
+        size_z=carrier_size_z,
+        sites=sites,
+        model="6StockCarrier",
+    )
+    carrier.num_items_x = 3
+    carrier.num_items_y = 2
+    carrier.num_items_z = 1
+    ordering = ["A1", "A2", "A3", "B1", "B2", "B3"]  # 自定义顺序
+    for i in range(6):
+        carrier[i] = YB_Solid_Stock(f"{name}_vial_{ordering[i]}")
+    return carrier
+
+
+def YB_6VialCarrier(name: str) -> BottleCarrier:
+    """6瓶载架 - 2x3布局"""
+
+    # 载架尺寸 (mm)
+    carrier_size_x = 127.8
+    carrier_size_y = 85.5
+    carrier_size_z = 50.0
+
+    # 瓶位尺寸
+    bottle_diameter = 30.0
+    bottle_spacing_x = 42.0  # X方向间距
+    bottle_spacing_y = 35.0  # Y方向间距
+
+    # 计算起始位置 (居中排列)
+    start_x = (carrier_size_x - (3 - 1) * bottle_spacing_x - bottle_diameter) / 2
+    start_y = (carrier_size_y - (2 - 1) * bottle_spacing_y - bottle_diameter) / 2
+
+    sites = create_ordered_items_2d(
+        klass=ResourceHolder,
+        num_items_x=3,
+        num_items_y=2,
+        dx=start_x,
+        dy=start_y,
+        dz=5.0,
+        item_dx=bottle_spacing_x,
+        item_dy=bottle_spacing_y,
+
+        size_x=bottle_diameter,
+        size_y=bottle_diameter,
+        size_z=carrier_size_z,
+    )
+    for k, v in sites.items():
+        v.name = f"{name}_{v.name}"
+
+    carrier = BottleCarrier(
+        name=name,
+        size_x=carrier_size_x,
+        size_y=carrier_size_y,
+        size_z=carrier_size_z,
+        sites=sites,
+        model="6VialCarrier",
+    )
+    carrier.num_items_x = 3
+    carrier.num_items_y = 2
+    carrier.num_items_z = 1
+    ordering = ["A1", "A2", "A3", "B1", "B2", "B3"]  # 自定义顺序
+    for i in range(3):
+        carrier[i] = YB_Solid_Vial(f"{name}_solidvial_{ordering[i]}")
+    for i in range(3, 6):
+        carrier[i] = YB_Liquid_Vial(f"{name}_liquidvial_{ordering[i]}")
+    return carrier
+
+"""1瓶载架 - 单个中央位置"""
+def YB_1BottleCarrier(name: str) -> BottleCarrier:
+    
+    # 载架尺寸 (mm)
+    carrier_size_x = 127.8
+    carrier_size_y = 85.5
+    carrier_size_z = 20.0
+
+    # 烧杯尺寸
+    beaker_diameter = 60.0
+
+    # 计算中央位置
+    center_x = (carrier_size_x - beaker_diameter) / 2
+    center_y = (carrier_size_y - beaker_diameter) / 2
+    center_z = 5.0
+
+    carrier = BottleCarrier(
+        name=name,
+        size_x=carrier_size_x,
+        size_y=carrier_size_y,
+        size_z=carrier_size_z,
+        sites=create_homogeneous_resources(
+            klass=ResourceHolder,
+            locations=[Coordinate(center_x, center_y, center_z)],
+            resource_size_x=beaker_diameter,
+            resource_size_y=beaker_diameter,
+            name_prefix=name,
+        ),
+        model="1BottleCarrier",
+    )
+    carrier.num_items_x = 1
+    carrier.num_items_y = 1
+    carrier.num_items_z = 1
+    carrier[0] = YB_ye_Bottle(f"{name}_flask_1")
+    return carrier
+
+
+"""5ml分液瓶板 - 4x2布局，8个位置"""
+def YB_6x5ml_DispensingVialCarrier(name: str) -> BottleCarrier:
+    
+
+    # 载架尺寸 (mm)
+    carrier_size_x = 127.8
+    carrier_size_y = 85.5
+    carrier_size_z = 50.0
+
+    # 瓶位尺寸
+    bottle_diameter = 15.0
+    bottle_spacing_x = 42.0  # X方向间距
+    bottle_spacing_y = 35.0  # Y方向间距
+
+    # 计算起始位置 (居中排列)
+    start_x = (carrier_size_x - (4 - 1) * bottle_spacing_x - bottle_diameter) / 2
+    start_y = (carrier_size_y - (2 - 1) * bottle_spacing_y - bottle_diameter) / 2
+
+    sites = create_ordered_items_2d(
+        klass=ResourceHolder,
+        num_items_x=4,
+        num_items_y=2,
+        dx=start_x,
+        dy=start_y,
+        dz=5.0,
+        item_dx=bottle_spacing_x,
+        item_dy=bottle_spacing_y,
+        size_x=bottle_diameter,
+        size_y=bottle_diameter,
+        size_z=carrier_size_z,
+    )
+    for k, v in sites.items():
+        v.name = f"{name}_{v.name}"
+
+    carrier = BottleCarrier(
+        name=name,
+        size_x=carrier_size_x,
+        size_y=carrier_size_y,
+        size_z=carrier_size_z,
+        sites=sites,
+        model="6x5ml_DispensingVialCarrier",
+    )
+    carrier.num_items_x = 4
+    carrier.num_items_y = 2
+    carrier.num_items_z = 1
+    ordering = ["A1", "A2", "A3", "A4", "B1", "B2", "B3", "B4"]
+    for i in range(8):
+        carrier[i] = YB_5ml_Dispensing_Vial(f"{name}_vial_{ordering[i]}")
+    return carrier
+
+"""20ml分液瓶板 - 4x2布局，8个位置"""
+def YB_6x20ml_DispensingVialCarrier(name: str) -> BottleCarrier:
+
+
+    # 载架尺寸 (mm)
+    carrier_size_x = 127.8
+    carrier_size_y = 85.5
+    carrier_size_z = 70.0
+
+    # 瓶位尺寸
+    bottle_diameter = 20.0
+    bottle_spacing_x = 42.0  # X方向间距
+    bottle_spacing_y = 35.0  # Y方向间距
+
+    # 计算起始位置 (居中排列)
+    start_x = (carrier_size_x - (4 - 1) * bottle_spacing_x - bottle_diameter) / 2
+    start_y = (carrier_size_y - (2 - 1) * bottle_spacing_y - bottle_diameter) / 2
+
+    sites = create_ordered_items_2d(
+        klass=ResourceHolder,
+        num_items_x=4,
+        num_items_y=2,
+        dx=start_x,
+        dy=start_y,
+        dz=5.0,
+        item_dx=bottle_spacing_x,
+        item_dy=bottle_spacing_y,
+        size_x=bottle_diameter,
+        size_y=bottle_diameter,
+        size_z=carrier_size_z,
+    )
+    for k, v in sites.items():
+        v.name = f"{name}_{v.name}"
+
+    carrier = BottleCarrier(
+        name=name,
+        size_x=carrier_size_x,
+        size_y=carrier_size_y,
+        size_z=carrier_size_z,
+        sites=sites,
+        model="6x20ml_DispensingVialCarrier",
+    )
+    carrier.num_items_x = 4
+    carrier.num_items_y = 2
+    carrier.num_items_z = 1
+    ordering = ["A1", "A2", "A3", "A4", "B1", "B2", "B3", "B4"]
+    for i in range(8):
+        carrier[i] = YB_20ml_Dispensing_Vial(f"{name}_vial_{ordering[i]}")
+    return carrier
+
+"""配液瓶(小)板 - 4x2布局，8个位置"""
+def YB_6x_SmallSolutionBottleCarrier(name: str) -> BottleCarrier:
+    
+
+    # 载架尺寸 (mm)
+    carrier_size_x = 127.8
+    carrier_size_y = 85.5
+    carrier_size_z = 65.0
+
+    # 瓶位尺寸
+    bottle_diameter = 35.0
+    bottle_spacing_x = 42.0  # X方向间距
+    bottle_spacing_y = 35.0  # Y方向间距
+
+    # 计算起始位置 (居中排列)
+    start_x = (carrier_size_x - (4 - 1) * bottle_spacing_x - bottle_diameter) / 2
+    start_y = (carrier_size_y - (2 - 1) * bottle_spacing_y - bottle_diameter) / 2
+
+    sites = create_ordered_items_2d(
+        klass=ResourceHolder,
+        num_items_x=4,
+        num_items_y=2,
+        dx=start_x,
+        dy=start_y,
+        dz=5.0,
+        item_dx=bottle_spacing_x,
+        item_dy=bottle_spacing_y,
+        size_x=bottle_diameter,
+        size_y=bottle_diameter,
+        size_z=carrier_size_z,
+    )
+    for k, v in sites.items():
+        v.name = f"{name}_{v.name}"
+
+    carrier = BottleCarrier(
+        name=name,
+        size_x=carrier_size_x,
+        size_y=carrier_size_y,
+        size_z=carrier_size_z,
+        sites=sites,
+        model="6x_SmallSolutionBottleCarrier",
+    )
+    carrier.num_items_x = 4
+    carrier.num_items_y = 2
+    carrier.num_items_z = 1
+    ordering = ["A1", "A2", "A3", "A4", "B1", "B2", "B3", "B4"]
+    for i in range(8):
+        carrier[i] = YB_Small_Solution_Bottle(f"{name}_bottle_{ordering[i]}")
+    return carrier
+
+
+def YB_4x_LargeSolutionBottleCarrier(name: str) -> BottleCarrier:
+    """配液瓶(大)板 - 2x2布局，4个位置"""
+
+    # 载架尺寸 (mm)
+    carrier_size_x = 127.8
+    carrier_size_y = 85.5
+    carrier_size_z = 95.0
+
+    # 瓶位尺寸
+    bottle_diameter = 55.0
+    bottle_spacing_x = 60.0  # X方向间距
+    bottle_spacing_y = 60.0  # Y方向间距
+
+    # 计算起始位置 (居中排列)
+    start_x = (carrier_size_x - (2 - 1) * bottle_spacing_x - bottle_diameter) / 2
+    start_y = (carrier_size_y - (2 - 1) * bottle_spacing_y - bottle_diameter) / 2
+
+    sites = create_ordered_items_2d(
+        klass=ResourceHolder,
+        num_items_x=2,
+        num_items_y=2,
+        dx=start_x,
+        dy=start_y,
+        dz=5.0,
+        item_dx=bottle_spacing_x,
+        item_dy=bottle_spacing_y,
+        size_x=bottle_diameter,
+        size_y=bottle_diameter,
+        size_z=carrier_size_z,
+    )
+    for k, v in sites.items():
+        v.name = f"{name}_{v.name}"
+
+    carrier = BottleCarrier(
+        name=name,
+        size_x=carrier_size_x,
+        size_y=carrier_size_y,
+        size_z=carrier_size_z,
+        sites=sites,
+        model="4x_LargeSolutionBottleCarrier",
+    )
+    carrier.num_items_x = 2
+    carrier.num_items_y = 2
+    carrier.num_items_z = 1
+    ordering = ["A1", "A2", "B1", "B2"]
+    for i in range(4):
+        carrier[i] = YB_Large_Solution_Bottle(f"{name}_bottle_{ordering[i]}")
+    return carrier
+
+"""加样头(大)板 - 1x1布局，1个位置"""
+def YB_jia_yang_tou_da_1X1_carrier(name: str) -> BottleCarrier:
+    
+    # 载架尺寸 (mm)
+    carrier_size_x = 127.8
+    carrier_size_y = 85.5
+    carrier_size_z = 95.0
+
+    # 瓶位尺寸
+    bottle_diameter = 35.0
+    bottle_spacing_x = 42.0  # X方向间距
+    bottle_spacing_y = 35.0  # Y方向间距
+
+    # 计算起始位置 (居中排列)
+    start_x = (carrier_size_x - (1 - 1) * bottle_spacing_x - bottle_diameter) / 2
+    start_y = (carrier_size_y - (1 - 1) * bottle_spacing_y - bottle_diameter) / 2
+
+    sites = create_ordered_items_2d(
+        klass=ResourceHolder,
+        num_items_x=1,
+        num_items_y=1,
+        dx=start_x,
+        dy=start_y,
+        dz=5.0,
+        item_dx=bottle_spacing_x,
+        item_dy=bottle_spacing_y,
+        size_x=bottle_diameter,
+        size_y=bottle_diameter,
+        size_z=carrier_size_z,
+    )
+    for k, v in sites.items():
+        v.name = f"{name}_{v.name}"
+
+    carrier = BottleCarrier(
+        name=name,
+        size_x=carrier_size_x,
+        size_y=carrier_size_y,
+        size_z=carrier_size_z,
+        sites=sites,
+        model="6x_LargeDispenseHeadCarrier",
+    )
+    carrier.num_items_x = 1
+    carrier.num_items_y = 1
+    carrier.num_items_z = 1
+    carrier[0] = YB_jia_yang_tou_da(f"{name}_head_1")
+    return carrier
+
+
+def YB_AdapterBlock(name: str) -> BottleCarrier:
+    """适配器块 - 单个中央位置"""
+
+    # 载架尺寸 (mm)
+    carrier_size_x = 127.8
+    carrier_size_y = 85.5
+    carrier_size_z = 30.0
+
+    # 适配器尺寸
+    adapter_diameter = 80.0
+
+    # 计算中央位置
+    center_x = (carrier_size_x - adapter_diameter) / 2
+    center_y = (carrier_size_y - adapter_diameter) / 2
+    center_z = 0.0
+
+    carrier = BottleCarrier(
+        name=name,
+        size_x=carrier_size_x,
+        size_y=carrier_size_y,
+        size_z=carrier_size_z,
+        sites=create_homogeneous_resources(
+            klass=ResourceHolder,
+            locations=[Coordinate(center_x, center_y, center_z)],
+            resource_size_x=adapter_diameter,
+            resource_size_y=adapter_diameter,
+            name_prefix=name,
+        ),
+        model="AdapterBlock",
+    )
+    carrier.num_items_x = 1
+    carrier.num_items_y = 1
+    carrier.num_items_z = 1
+    # 适配器块本身不包含瓶子，只是一个支撑结构
+    return carrier
+
+
+def YB_TipBox(name: str) -> BottleCarrier:
+    """枪头盒 - 8x12布局，96个位置"""
+
+    # 载架尺寸 (mm)
+    carrier_size_x = 127.8
+    carrier_size_y = 85.5
+    carrier_size_z = 55.0
+
+    # 枪头尺寸
+    tip_diameter = 10.0
+    tip_spacing_x = 9.0  # X方向间距
+    tip_spacing_y = 9.0  # Y方向间距
+
+    # 计算起始位置 (居中排列)
+    start_x = (carrier_size_x - (12 - 1) * tip_spacing_x - tip_diameter) / 2
+    start_y = (carrier_size_y - (8 - 1) * tip_spacing_y - tip_diameter) / 2
+
+    sites = create_ordered_items_2d(
+        klass=ResourceHolder,
+        num_items_x=12,
+        num_items_y=8,
+        dx=start_x,
+        dy=start_y,
+        dz=5.0,
+        item_dx=tip_spacing_x,
+        item_dy=tip_spacing_y,
+        size_x=tip_diameter,
+        size_y=tip_diameter,
+        size_z=carrier_size_z,
+    )
+    for k, v in sites.items():
+        v.name = f"{name}_{v.name}"
+
+    carrier = BottleCarrier(
+        name=name,
+        size_x=carrier_size_x,
+        size_y=carrier_size_y,
+        size_z=carrier_size_z,
+        sites=sites,
+        model="TipBox",
+    )
+    carrier.num_items_x = 12
+    carrier.num_items_y = 8
+    carrier.num_items_z = 1
+    # 创建96个枪头
+    for i in range(96):
+        row = chr(65 + i // 12)  # A-H
+        col = (i % 12) + 1  # 1-12
+        carrier[i] = YB_Pipette_Tip(f"{name}_tip_{row}{col}")
+    return carrier
+