fix: discard_tips

unilabos/devices/ChinWe/chinwe.py

@@ -0,0 +1,282 @@
+import sys
+import threading
+import serial
+import serial.tools.list_ports
+import re
+import time
+from typing import Optional, List, Dict, Tuple
+
+class ChinweDevice:
+    """
+    ChinWe设备控制类
+    提供串口通信、电机控制、传感器数据读取等功能
+    """
+    
+    def __init__(self, port: str, baudrate: int = 115200, debug: bool = False):
+        """
+        初始化ChinWe设备
+        
+        Args:
+            port: 串口名称，如果为None则自动检测
+            baudrate: 波特率，默认115200
+        """
+        self.debug = debug
+        self.port = port
+        self.baudrate = baudrate
+        self.serial_port: Optional[serial.Serial] = None
+        self._voltage: float = 0.0
+        self._ec_value: float = 0.0
+        self._ec_adc_value: int = 0
+        self._is_connected = False
+        self.connect()
+    
+    @property
+    def is_connected(self) -> bool:
+        """获取连接状态"""
+        return self._is_connected and self.serial_port and self.serial_port.is_open
+    
+    @property
+    def voltage(self) -> float:
+        """获取电源电压值"""
+        return self._voltage
+    
+    @property
+    def ec_value(self) -> float:
+        """获取电导率值 (ms/cm)"""
+        return self._ec_value
+
+    @property
+    def ec_adc_value(self) -> int:
+        """获取EC ADC原始值"""
+        return self._ec_adc_value
+    
+
+    @property
+    def device_status(self) -> Dict[str, any]:
+        """
+        获取设备状态信息
+        
+        Returns:
+            包含设备状态的字典
+        """
+        return {
+            "connected": self.is_connected,
+            "port": self.port,
+            "baudrate": self.baudrate,
+            "voltage": self.voltage,
+            "ec_value": self.ec_value,
+            "ec_adc_value": self.ec_adc_value
+        }
+    
+    def connect(self, port: Optional[str] = None, baudrate: Optional[int] = None) -> bool:
+        """
+        连接到串口设备
+        
+        Args:
+            port: 串口名称，如果为None则使用初始化时的port或自动检测
+            baudrate: 波特率，如果为None则使用初始化时的baudrate
+            
+        Returns:
+            连接是否成功
+        """
+        if self.is_connected:
+            return True
+            
+        target_port = port or self.port
+        target_baudrate = baudrate or self.baudrate
+        
+        try:
+            self.serial_port = serial.Serial(target_port, target_baudrate, timeout=0.5)
+            self._is_connected = True
+            self.port = target_port
+            self.baudrate = target_baudrate
+            connect_allow_times = 5
+            while not self.serial_port.is_open and connect_allow_times > 0:
+                time.sleep(0.5)
+                connect_allow_times -= 1
+                print(f"尝试连接到 {target_port} @ {target_baudrate}，剩余尝试次数: {connect_allow_times}", self.debug)
+                raise ValueError("串口未打开，请检查设备连接")
+            print(f"已连接到 {target_port} @ {target_baudrate}", self.debug)
+            threading.Thread(target=self._read_data, daemon=True).start()
+            return True
+        except Exception as e:
+            print(f"ChinweDevice连接失败: {e}")
+            self._is_connected = False
+            return False
+    
+    def disconnect(self) -> bool:
+        """
+        断开串口连接
+        
+        Returns:
+            断开是否成功
+        """
+        if self.serial_port and self.serial_port.is_open:
+            try:
+                self.serial_port.close()
+                self._is_connected = False
+                print("已断开串口连接")
+                return True
+            except Exception as e:
+                print(f"断开连接失败: {e}")
+                return False
+        return True
+    
+    def _send_motor_command(self, command: str) -> bool:
+        """
+        发送电机控制命令
+        
+        Args:
+            command: 电机命令字符串，例如 "M 1 CW 1.5"
+            
+        Returns:
+            发送是否成功
+        """
+        if not self.is_connected:
+            print("设备未连接")
+            return False
+            
+        try:
+            self.serial_port.write((command + "\n").encode('utf-8'))
+            print(f"发送命令: {command}")
+            return True
+        except Exception as e:
+            print(f"发送命令失败: {e}")
+            return False
+    
+    def rotate_motor(self, motor_id: int, turns: float, clockwise: bool = True) -> bool:
+        """
+        使电机转动指定圈数
+        
+        Args:
+            motor_id: 电机ID（1, 2, 3...）
+            turns: 转动圈数，支持小数
+            clockwise: True为顺时针，False为逆时针
+            
+        Returns:
+            命令发送是否成功
+        """
+        if clockwise:
+            command = f"M {motor_id} CW {turns}"
+        else:
+            command = f"M {motor_id} CCW {turns}"
+        return self._send_motor_command(command)
+
+    def set_motor_speed(self, motor_id: int, speed: float) -> bool:
+        """
+        设置电机转速（如果设备支持）
+        
+        Args:
+            motor_id: 电机ID（1, 2, 3...）
+            speed: 转速值
+            
+        Returns:
+            命令发送是否成功
+        """
+        command = f"M {motor_id} SPEED {speed}"
+        return self._send_motor_command(command)
+
+    def _read_data(self) -> List[str]:
+        """
+        读取串口数据并解析
+        
+        Returns:
+            读取到的数据行列表
+        """
+        print("开始读取串口数据...")
+        if not self.is_connected:
+            return []
+            
+        data_lines = []
+        try:
+            while self.serial_port.in_waiting:
+                time.sleep(0.1)  # 等待数据稳定
+                try:
+                    line = self.serial_port.readline().decode('utf-8', errors='ignore').strip()
+                    if line:
+                        data_lines.append(line)
+                        self._parse_sensor_data(line)
+                except Exception as ex:
+                    print(f"解码数据错误: {ex}")
+        except Exception as e:
+            print(f"读取串口数据错误: {e}")
+            
+        return data_lines
+    
+    def _parse_sensor_data(self, line: str) -> None:
+        """
+        解析传感器数据
+        
+        Args:
+            line: 接收到的数据行
+        """
+        # 解析电源电压
+        if "电源电压" in line:
+            try:
+                val = float(line.split("：")[1].replace("V", "").strip())
+                self._voltage = val
+                if self.debug:
+                    print(f"电源电压更新: {val}V")
+            except Exception:
+                pass
+
+        # 解析电导率和ADC原始值（支持两种格式）
+        if "电导率" in line and "ADC原始值" in line:
+            try:
+                # 支持格式如：电导率：2.50ms/cm, ADC原始值：2052
+                ec_match = re.search(r"电导率[:：]\s*([\d\.]+)", line)
+                adc_match = re.search(r"ADC原始值[:：]\s*(\d+)", line)
+                if ec_match:
+                    ec_val = float(ec_match.group(1))
+                    self._ec_value = ec_val
+                    if self.debug:
+                        print(f"电导率更新: {ec_val:.2f} ms/cm")
+                if adc_match:
+                    adc_val = int(adc_match.group(1))
+                    self._ec_adc_value = adc_val
+                    if self.debug:
+                        print(f"EC ADC原始值更新: {adc_val}")
+            except Exception:
+                pass
+        # 仅电导率，无ADC原始值
+        elif "电导率" in line:
+            try:
+                val = float(line.split("：")[1].replace("ms/cm", "").strip())
+                self._ec_value = val
+                if self.debug:
+                    print(f"电导率更新: {val:.2f} ms/cm")
+            except Exception:
+                pass
+        # 仅ADC原始值（如有分开回传场景）
+        elif "ADC原始值" in line:
+            try:
+                adc_val = int(line.split("：")[1].strip())
+                self._ec_adc_value = adc_val
+                if self.debug:
+                    print(f"EC ADC原始值更新: {adc_val}")
+            except Exception:
+                pass
+    
+    def spin_when_ec_ge_0():
+        pass
+    
+
+def main():
+    """测试函数"""
+    print("=== ChinWe设备测试 ===")
+    
+    # 创建设备实例
+    device = ChinweDevice("/dev/tty.usbserial-A5069RR4", debug=True)
+    try:
+        # 测试5: 发送电机命令
+        print("\n5. 发送电机命令测试:")
+        print("  5.3 使用通用函数控制电机20顺时针转2圈:")
+        device.rotate_motor(2, 20.0, clockwise=True)
+        time.sleep(0.5)
+    finally:
+        time.sleep(10)
+        # 测试7: 断开连接
+        print("\n7. 断开连接:")
+        device.disconnect()
+if __name__ == "__main__":
+    main()

unilabos/devices/liquid_handling/liquid_handler_abstract.py

@@ -138,6 +138,8 @@ class LiquidHandlerMiddleware(LiquidHandler):
         offsets: Optional[List[Coordinate]] = None,
         **backend_kwargs,
     ):
+        if not offsets or (isinstance(offsets, list) and len(offsets) != len(use_channels)):
+            offsets = [Coordinate.zero()] * len(use_channels)
         if self._simulator:
             return await self._simulate_handler.discard_tips(use_channels, allow_nonzero_volume, offsets, **backend_kwargs)
         return await super().discard_tips(use_channels, allow_nonzero_volume, offsets, **backend_kwargs)

unilabos/devices/pump_and_valve/runze_backbone.py

@@ -3,6 +3,7 @@ from threading import Lock, Event
 from enum import Enum
 from dataclasses import dataclass
 import time
+import traceback
 from typing import Any, Union, Optional, overload
 
 import serial.tools.list_ports
@@ -386,3 +387,8 @@ class RunzeSyringePump:
     def list():
         for item in serial.tools.list_ports.comports():
             yield RunzeSyringePumpInfo(port=item.device)
+
+
+if __name__ == "__main__":
+    r = RunzeSyringePump("/dev/tty.usbserial-D30JUGG5", "1", 25.0)
+    r.initialize()

unilabos/registry/devices/liquid_handler.yaml

@@ -703,6 +703,8 @@ liquid_handler:
       discard_tips:
         feedback: {}
         goal:
+          allow_nonzero_volume: allow_nonzero_volume
+          offsets: offsets
           use_channels: use_channels
         goal_default:
           use_channels:
@@ -978,6 +980,8 @@ liquid_handler:
           use_channels:
           - 0
         handles: []
+        placeholder_keys:
+          tip_spots: unilabos_resources
         result:
           name: name
         schema:
@@ -6014,36 +6018,6 @@ liquid_handler.prcxi:
           title: custom_delay参数
           type: object
         type: UniLabJsonCommandAsync
-      auto-discard_tips:
-        feedback: {}
-        goal: {}
-        goal_default:
-          allow_nonzero_volume: true
-          offsets: null
-          use_channels: null
-        handles: []
-        result: {}
-        schema:
-          description: discard_tips的参数schema
-          properties:
-            feedback: {}
-            goal:
-              properties:
-                allow_nonzero_volume:
-                  default: true
-                  type: boolean
-                offsets:
-                  type: string
-                use_channels:
-                  type: string
-              required: []
-              type: object
-            result: {}
-          required:
-          - goal
-          title: discard_tips参数
-          type: object
-        type: UniLabJsonCommandAsync
       auto-iter_tips:
         feedback: {}
         goal: {}
@@ -6144,6 +6118,53 @@ liquid_handler.prcxi:
           title: touch_tip参数
           type: object
         type: UniLabJsonCommandAsync
+      discard_tips:
+        feedback: {}
+        goal:
+          allow_nonzero_volume: allow_nonzero_volume
+          offsets: offsets
+          use_channels: use_channels
+        goal_default:
+          use_channels:
+          - 0
+        handles: []
+        result: {}
+        schema:
+          description: ''
+          properties:
+            feedback:
+              properties: {}
+              required: []
+              title: LiquidHandlerDiscardTips_Feedback
+              type: object
+            goal:
+              properties:
+                use_channels:
+                  items:
+                    maximum: 2147483647
+                    minimum: -2147483648
+                    type: integer
+                  type: array
+              required:
+              - use_channels
+              title: LiquidHandlerDiscardTips_Goal
+              type: object
+            result:
+              properties:
+                return_info:
+                  type: string
+                success:
+                  type: boolean
+              required:
+              - return_info
+              - success
+              title: LiquidHandlerDiscardTips_Result
+              type: object
+          required:
+          - goal
+          title: LiquidHandlerDiscardTips
+          type: object
+        type: LiquidHandlerDiscardTips
       dispense:
         feedback: {}
         goal:
@@ -6343,7 +6364,11 @@ liquid_handler.prcxi:
         type: LiquidHandlerDispense
       drop_tips:
         feedback: {}
-        goal: {}
+        goal:
+          allow_nonzero_volume: allow_nonzero_volume
+          offsets: offsets
+          tip_spots: tip_spots
+          use_channels: use_channels
         goal_default:
           allow_nonzero_volume: false
           offsets:
@@ -6373,6 +6398,8 @@ liquid_handler.prcxi:
           use_channels:
           - 0
         handles: []
+        placeholder_keys:
+          tip_spots: unilabos_resources
         result: {}
         schema:
           description: ''

unilabos/registry/registry.py

@@ -447,6 +447,8 @@ class Registry:
                         if complete_registry:
                             device_config["class"]["status_types"].clear()
                             enhanced_info = get_enhanced_class_info(device_config["class"]["module"], use_dynamic=True)
+                            if not enhanced_info.get("dynamic_import_success", False):
+                                continue
                             device_config["class"]["status_types"].update(
                                 {k: v["return_type"] for k, v in enhanced_info["status_methods"].items()}
                             )

unilabos/ros/nodes/presets/protocol_node.py

@@ -88,6 +88,9 @@ class ROS2ProtocolNode(BaseROS2DeviceNode):
             if device_config.get("type", "device") != "device":
                 continue
             # 设置硬件接口代理
+            if device_id not in self.sub_devices:
+                self.lab_logger().error(f"[Protocol Node] {device_id} 还没有正确初始化，跳过...")
+                continue
             d = self.sub_devices[device_id]
             if d:
                 hardware_interface = d.ros_node_instance._hardware_interface