feat: add ZDT_X42 motor and XKC sensor drivers

unilabos/devices/motor/ZDT_X42.py

@@ -0,0 +1,376 @@
+# -*- coding: utf-8 -*-
+"""
+ZDT X42 Closed-Loop Stepper Motor Driver
+RS485 Serial Communication via USB-Serial Converter
+
+- Baudrate: 115200
+"""
+
+import serial
+import time
+import threading
+import struct
+import logging
+from typing import Optional, Any
+
+try:
+    from unilabos.device_comms.universal_driver import UniversalDriver
+except ImportError:
+    class UniversalDriver:
+        def __init__(self, *args, **kwargs):
+            self.logger = logging.getLogger(self.__class__.__name__)
+        def execute_command_from_outer(self, command: Any): pass
+
+from serial.rs485 import RS485Settings
+
+
+class ZDTX42Driver(UniversalDriver):
+    """
+    ZDT X42 闭环步进电机驱动器
+
+    支持功能:
+    - 速度模式运行
+    - 位置模式运行 (相对/绝对)
+    - 位置读取和清零
+    - 使能/禁用控制
+
+    通信协议:
+    - 帧格式: [设备ID] [功能码] [数据...] [校验位=0x6B]
+    - 响应长度根据功能码决定
+    """
+
+    def __init__(
+        self,
+        port: str,
+        baudrate: int = 115200,
+        device_id: int = 1,
+        timeout: float = 0.5,
+        debug: bool = False
+    ):
+        """
+        初始化 ZDT X42 电机驱动
+
+        Args:
+            port: 串口设备路径
+            baudrate: 波特率 (默认 115200)
+            device_id: 设备地址 (1-255)
+            timeout: 通信超时时间(秒)
+            debug: 是否启用调试输出
+        """
+        super().__init__()
+        self.id = device_id
+        self.debug = debug
+        self.lock = threading.RLock()
+        self.status = "idle"         # 对应注册表中的 status (str)
+        self.position = 0             # 对应注册表中的 position (int)
+
+        try:
+            self.ser = serial.Serial(
+                port=port,
+                baudrate=baudrate,
+                timeout=timeout,
+                bytesize=serial.EIGHTBITS,
+                parity=serial.PARITY_NONE,
+                stopbits=serial.STOPBITS_ONE
+            )
+
+            # 启用 RS485 模式
+            try:
+                self.ser.rs485_mode = RS485Settings(
+                    rts_level_for_tx=True,
+                    rts_level_for_rx=False
+                )
+            except Exception:
+                pass  # RS485 模式是可选的
+
+            self.logger.info(
+                f"ZDT X42 Motor connected: {port} "
+                f"(Baud: {baudrate}, ID: {device_id})"
+            )
+            # 自动使能电机，确保初始状态可运动
+            self.enable(True)
+
+            # 启动背景轮询线程，确保 position 实时刷新
+            self._stop_event = threading.Event()
+            self._polling_thread = threading.Thread(
+                target=self._update_loop,
+                name=f"ZDTPolling_{port}",
+                daemon=True
+            )
+            self._polling_thread.start()
+        except Exception as e:
+            self.logger.error(f"Failed to open serial port {port}: {e}")
+            self.ser = None
+
+    def _update_loop(self):
+        """背景循环读取电机位置"""
+        while not self._stop_event.is_set():
+            try:
+                self.get_position()
+            except Exception as e:
+                if self.debug:
+                    self.logger.error(f"Polling error: {e}")
+            time.sleep(1.0) # 每1秒刷新一次位置数据
+
+    def _send(self, func_code: int, payload: list) -> bytes:
+        """
+        发送指令并接收响应
+
+        Args:
+            func_code: 功能码
+            payload: 数据负载 (list of bytes)
+
+        Returns:
+            响应数据 (bytes)
+        """
+        if not self.ser:
+            self.logger.error("Serial port not available")
+            return b""
+
+        with self.lock:
+            # 清空输入缓冲区
+            self.ser.reset_input_buffer()
+
+            # 构建消息: [ID] [功能码] [数据...] [校验位=0x6B]
+            message = bytes([self.id, func_code] + payload + [0x6B])
+
+            # 发送
+            self.ser.write(message)
+
+            # 根据功能码决定响应长度
+            # 查询类指令返回 10 字节，控制类指令返回 4 字节
+            read_len = 10 if func_code in [0x31, 0x32, 0x35, 0x24, 0x27] else 4
+            response = self.ser.read(read_len)
+
+            # 调试输出
+            if self.debug:
+                sent_hex = message.hex().upper()
+                recv_hex = response.hex().upper() if response else 'TIMEOUT'
+                print(f"[ID {self.id}] TX: {sent_hex} → RX: {recv_hex}")
+
+            return response
+
+    def enable(self, on: bool = True) -> bool:
+        """
+        使能/禁用电机
+
+        Args:
+            on: True=使能(锁轴), False=禁用(松轴)
+
+        Returns:
+            是否成功
+        """
+        state = 1 if on else 0
+        resp = self._send(0xF3, [0xAB, state, 0])
+        return len(resp) >= 4
+
+    def move_speed(
+        self,
+        speed_rpm: int,
+        direction: str = "CW",
+        acceleration: int = 10
+    ) -> bool:
+        """
+        速度模式运行
+
+        Args:
+            speed_rpm: 转速 (RPM)
+            direction: 方向 ("CW"=顺时针, "CCW"=逆时针)
+            acceleration: 加速度 (0-255)
+
+        Returns:
+            是否成功
+        """
+        dir_val = 0 if direction.upper() in ["CW", "顺时针"] else 1
+        speed_bytes = struct.pack('>H', int(speed_rpm))
+        self.status = f"moving@{speed_rpm}rpm"
+        resp = self._send(0xF6, [dir_val, speed_bytes[0], speed_bytes[1], acceleration, 0])
+        return len(resp) >= 4
+
+    def move_position(
+        self,
+        pulses: int,
+        speed_rpm: int,
+        direction: str = "CW",
+        acceleration: int = 10,
+        absolute: bool = False
+    ) -> bool:
+        """
+        位置模式运行
+
+        Args:
+            pulses: 脉冲数
+            speed_rpm: 转速 (RPM)
+            direction: 方向 ("CW"=顺时针, "CCW"=逆时针)
+            acceleration: 加速度 (0-255)
+            absolute: True=绝对位置, False=相对位置
+
+        Returns:
+            是否成功
+        """
+        dir_val = 0 if direction.upper() in ["CW", "顺时针"] else 1
+        speed_bytes = struct.pack('>H', int(speed_rpm))
+        self.status = f"moving_to_{pulses}"
+        pulse_bytes = struct.pack('>I', int(pulses))
+        abs_flag = 1 if absolute else 0
+
+        payload = [
+            dir_val,
+            speed_bytes[0], speed_bytes[1],
+            acceleration,
+            pulse_bytes[0], pulse_bytes[1], pulse_bytes[2], pulse_bytes[3],
+            abs_flag,
+            0
+        ]
+
+        resp = self._send(0xFD, payload)
+        return len(resp) >= 4
+
+    def stop(self) -> bool:
+        """
+        停止电机
+
+        Returns:
+            是否成功
+        """
+        self.status = "idle"
+        resp = self._send(0xFE, [0x98, 0])
+        return len(resp) >= 4
+
+    def rotate_quarter(self, speed_rpm: int = 60, direction: str = "CW") -> bool:
+        """
+        电机旋转 1/4 圈 (阻塞式)
+        假设电机细分为 3200 脉冲/圈，1/4 圈 = 800 脉冲
+        """
+        pulses = 800
+        success = self.move_position(pulses=pulses, speed_rpm=speed_rpm, direction=direction, absolute=False)
+
+        if success:
+            # 计算预估旋转时间并进行阻塞等待 (Time = revolutions / (RPM/60))
+            # 1/4 rev / (RPM/60) = 15.0 / RPM
+            estimated_time = 15.0 / max(1, speed_rpm)
+            time.sleep(estimated_time + 0.5)  # 额外给 0.5 秒缓冲
+            self.status = "idle"
+
+        return success
+
+    def wait_time(self, duration_s: float) -> bool:
+        """
+        等待指定时间 (秒)
+        """
+        self.logger.info(f"Waiting for {duration_s} seconds...")
+        time.sleep(duration_s)
+        return True
+
+    def set_zero(self) -> bool:
+        """
+        清零当前位置
+
+        Returns:
+            是否成功
+        """
+        resp = self._send(0x0A, [])
+        return len(resp) >= 4
+
+    def get_position(self) -> Optional[int]:
+        """
+        读取当前位置 (脉冲数)
+
+        Returns:
+            当前位置脉冲数，失败返回 None
+        """
+        resp = self._send(0x32, [])
+
+        if len(resp) >= 8:
+            # 响应格式: [ID] [Func] [符号位] [数值4字节] [校验]
+            sign = resp[2]  # 0=正, 1=负
+            value = struct.unpack('>I', resp[3:7])[0]
+            self.position = -value if sign == 1 else value
+
+            if self.debug:
+                print(f"[Position] Raw: {resp.hex().upper()}, Parsed: {self.position}")
+
+            return self.position
+
+        self.logger.warning("Failed to read position")
+        return None
+
+    def close(self):
+        """关闭串口连接并停止线程"""
+        if hasattr(self, '_stop_event'):
+            self._stop_event.set()
+
+        if self.ser and self.ser.is_open:
+            self.ser.close()
+            self.logger.info("Serial port closed")
+
+
+# ============================================================
+# 测试和调试代码
+# ============================================================
+
+def test_motor():
+    """基础功能测试"""
+    logging.basicConfig(level=logging.INFO)
+
+    print("="*60)
+    print("ZDT X42 电机驱动测试")
+    print("="*60)
+
+    driver = ZDTX42Driver(
+        port="/dev/tty.usbserial-3110",
+        baudrate=115200,
+        device_id=2,
+        debug=True
+    )
+
+    if not driver.ser:
+        print("❌ 串口打开失败")
+        return
+
+    try:
+        # 测试 1: 读取位置
+        print("\n[1] 读取当前位置")
+        pos = driver.get_position()
+        print(f"✓ 当前位置: {pos} 脉冲")
+
+        # 测试 2: 使能
+        print("\n[2] 使能电机")
+        driver.enable(True)
+        time.sleep(0.3)
+        print("✓ 电机已锁定")
+
+        # 测试 3: 相对位置运动
+        print("\n[3] 相对位置运动 (1000脉冲)")
+        driver.move_position(pulses=1000, speed_rpm=60, direction="CW")
+        time.sleep(2)
+        pos = driver.get_position()
+        print(f"✓ 新位置: {pos}")
+
+        # 测试 4: 速度运动
+        print("\n[4] 速度模式 (30RPM, 3秒)")
+        driver.move_speed(speed_rpm=30, direction="CW")
+        time.sleep(3)
+        driver.stop()
+        pos = driver.get_position()
+        print(f"✓ 停止后位置: {pos}")
+
+        # 测试 5: 禁用
+        print("\n[5] 禁用电机")
+        driver.enable(False)
+        print("✓ 电机已松开")
+
+        print("\n" + "="*60)
+        print("✅ 测试完成")
+        print("="*60)
+
+    except Exception as e:
+        print(f"\n❌ 测试失败: {e}")
+        import traceback
+        traceback.print_exc()
+    finally:
+        driver.close()
+
+
+if __name__ == "__main__":
+    test_motor()

unilabos/devices/separator/xkc_sensor.py

@@ -0,0 +1,379 @@
+# -*- coding: utf-8 -*-
+"""
+XKC RS485 液位传感器 (Modbus RTU)
+
+说明:
+    1. 遵循 Modbus-RTU 协议。
+    2. 数据寄存器: 0x0001 (液位状态, 1=有液, 0=无液), 0x0002 (RSSI 信号强度)。
+    3. 地址寄存器: 0x0004 (可读写, 范围 1-254)。
+    4. 波特率寄存器: 0x0005 (可写, 代码表见 change_baudrate 方法)。
+"""
+
+import struct
+import threading
+import time
+import logging
+import serial
+from typing import Optional, Dict, Any, List
+
+from unilabos.device_comms.universal_driver import UniversalDriver
+
+class TransportManager:
+    """
+    统一通信管理类。
+    仅支持 串口 (Serial/有线) 连接。
+    """
+    def __init__(self, port: str, baudrate: int = 9600, timeout: float = 3.0, logger=None):
+        self.port = port
+        self.baudrate = baudrate
+        self.timeout = timeout
+        self.logger = logger
+        self.lock = threading.RLock() # 线程锁，确保多设备共用一个连接时不冲突
+
+        self.serial = None
+        self._connect_serial()
+
+    def _connect_serial(self):
+        try:
+            self.serial = serial.Serial(
+                port=self.port,
+                baudrate=self.baudrate,
+                timeout=self.timeout
+            )
+        except Exception as e:
+            raise ConnectionError(f"Serial open failed: {e}")
+
+    def close(self):
+        """关闭连接"""
+        if self.serial and self.serial.is_open:
+            self.serial.close()
+
+    def clear_buffer(self):
+        """清空缓冲区 (Thread-safe)"""
+        with self.lock:
+            if self.serial:
+                self.serial.reset_input_buffer()
+
+    def write(self, data: bytes):
+        """发送原始字节"""
+        with self.lock:
+            if self.serial:
+                self.serial.write(data)
+
+    def read(self, size: int) -> bytes:
+        """读取指定长度字节"""
+        if self.serial:
+            return self.serial.read(size)
+        return b''
+
+class XKCSensorDriver(UniversalDriver):
+    """XKC RS485 液位传感器 (Modbus RTU)"""
+
+    def __init__(self, port: str, baudrate: int = 9600, device_id: int = 6,
+                 threshold: int = 300, timeout: float = 3.0, debug: bool = False):
+        super().__init__()
+        self.port = port
+        self.baudrate = baudrate
+        self.device_id = device_id
+        self.threshold = threshold
+        self.timeout = timeout
+        self.debug = debug
+        self.level = False
+        self.rssi = 0
+        self.status = {"level": self.level, "rssi": self.rssi}
+
+        try:
+            self.transport = TransportManager(port, baudrate, timeout, logger=self.logger)
+            self.logger.info(f"XKCSensorDriver connected to {port} (ID: {device_id})")
+        except Exception as e:
+            self.logger.error(f"Failed to connect XKCSensorDriver: {e}")
+            self.transport = None
+
+        # 启动背景轮询线程，确保 status 实时刷新
+        self._stop_event = threading.Event()
+        self._polling_thread = threading.Thread(
+            target=self._update_loop,
+            name=f"XKCPolling_{port}",
+            daemon=True
+        )
+        if self.transport:
+            self._polling_thread.start()
+
+    def _update_loop(self):
+        """背景循环读取传感器数据"""
+        while not self._stop_event.is_set():
+            try:
+                self.read_level()
+            except Exception as e:
+                if self.debug:
+                    self.logger.error(f"Polling error: {e}")
+            time.sleep(2.0) # 每2秒刷新一次数据
+
+    def _crc(self, data: bytes) -> bytes:
+        crc = 0xFFFF
+        for byte in data:
+            crc ^= byte
+            for _ in range(8):
+                if crc & 0x0001: crc = (crc >> 1) ^ 0xA001
+                else: crc >>= 1
+        return struct.pack('<H', crc)
+
+    def read_level(self) -> Optional[Dict[str, Any]]:
+        """
+        读取液位。
+        返回: {'level': bool, 'rssi': int}
+        """
+        if not self.transport:
+            return None
+
+        with self.transport.lock:
+            self.transport.clear_buffer()
+            # Modbus Read Registers: 01 03 00 01 00 02 CRC
+            payload = struct.pack('>HH', 0x0001, 0x0002)
+            msg = struct.pack('BB', self.device_id, 0x03) + payload
+            msg += self._crc(msg)
+
+            if self.debug:
+                self.logger.info(f"TX (ID {self.device_id}): {msg.hex().upper()}")
+
+            self.transport.write(msg)
+
+            # Read header
+            h = self.transport.read(3) # Addr, Func, Len
+            if self.debug:
+                self.logger.info(f"RX Header: {h.hex().upper()}")
+
+            if len(h) < 3: return None
+            length = h[2]
+
+            # Read body + CRC
+            body = self.transport.read(length + 2)
+            if self.debug:
+                self.logger.info(f"RX Body+CRC: {body.hex().upper()}")
+            if len(body) < length + 2:
+                # Firmware bug fix specific to some modules
+                if len(body) == 4 and length == 4:
+                    pass
+                else:
+                    return None
+
+            data = body[:-2]
+            # 根据手册说明:
+            # 寄存器 0x0001 (data[0:2]): 液位状态 (00 01 为有液, 00 00 为无液)
+            # 寄存器 0x0002 (data[2:4]): 信号强度 RSSI
+
+            hw_level = False
+            rssi = 0
+
+            if len(data) >= 4:
+                hw_level = ((data[0] << 8) | data[1]) == 1
+                rssi = (data[2] << 8) | data[3]
+            elif len(data) == 2:
+                # 兼容模式: 某些老固件可能只返回 1 个寄存器
+                rssi = (data[0] << 8) | data[1]
+                hw_level = rssi > self.threshold
+            else:
+                return None
+
+            # 最终判定: 优先使用硬件层级的 level 判定，但 RSSI 阈值逻辑作为补充/校验
+            # 注意: 如果用户显式设置了 THRESHOLD，我们可以在逻辑中做权衡
+            self.level = hw_level or (rssi > self.threshold)
+            self.rssi = rssi
+            result = {
+                'level': self.level,
+                'rssi': self.rssi
+            }
+            self.status = result
+            return result
+
+    def wait_level(self, target_state: bool, timeout: float = 60.0) -> bool:
+        """
+        等待液位达到目标状态 (阻塞式)
+        """
+        self.logger.info(f"Waiting for level: {target_state}")
+        start_time = time.time()
+        while (time.time() - start_time) < timeout:
+            res = self.read_level()
+            if res and res.get('level') == target_state:
+                return True
+            time.sleep(0.5)
+        self.logger.warning(f"Wait level timeout ({timeout}s)")
+        return False
+
+    def wait_for_liquid(self, target_state: bool, timeout: float = 120.0) -> bool:
+        """
+        实时检测电导率(RSSI)并等待用户指定的“有液”或“无液”状态。
+        一旦检测到符合目标状态，立即返回。
+
+        Args:
+            target_state: True 为“有液”, False 为“无液”
+            timeout: 最大等待时间(秒)
+        """
+        state_str = "有液" if target_state else "无液"
+        self.logger.info(f"开始实时检测电导率，等待状态: {state_str} (超时: {timeout}s)")
+
+        start_time = time.time()
+        while (time.time() - start_time) < timeout:
+            res = self.read_level() # 内部已更新 self.level 和 self.rssi
+            if res:
+                current_level = res.get('level')
+                current_rssi = res.get('rssi')
+                if current_level == target_state:
+                    self.logger.info(f"✅ 检测到目标状态: {state_str} (当前电导率/RSSI: {current_rssi})")
+                    return True
+
+                if self.debug:
+                    self.logger.debug(f"当前状态: {'有液' if current_level else '无液'}, RSSI: {current_rssi}")
+
+            time.sleep(0.2) # 高频采样
+
+        self.logger.warning(f"❌ 等待 {state_str} 状态超时 ({timeout}s)")
+        return False
+
+    def set_threshold(self, threshold: int):
+        """设置液位判定阈值"""
+        self.threshold = int(threshold)
+        self.logger.info(f"Threshold updated to: {self.threshold}")
+
+    def change_device_id(self, new_id: int) -> bool:
+        """
+        修改设备的 Modbus 从站地址。
+        寄存器: 0x0004, 功能码: 0x06
+        """
+        if not (1 <= new_id <= 254):
+            self.logger.error(f"Invalid device ID: {new_id}. Must be 1-254.")
+            return False
+
+        self.logger.info(f"Changing device ID from {self.device_id} to {new_id}")
+        success = self._write_single_register(0x0004, new_id)
+        if success:
+            self.device_id = new_id # 更新内存中的地址
+            self.logger.info(f"Device ID update command sent successfully (target {new_id}).")
+        return success
+
+    def change_baudrate(self, baud_code: int) -> bool:
+        """
+        更改通讯波特率 (寄存器: 0x0005)。
+        设置成功后传感器 LED 会闪烁，通常无数据返回。
+
+        波特率代码对照表 (16进制):
+        05: 2400
+        06: 4800
+        07: 9600 (默认)
+        08: 14400
+        09: 19200
+        0A: 28800
+        0C: 57600
+        0D: 115200
+        0E: 128000
+        0F: 256000
+        """
+        self.logger.info(f"Sending baudrate change command (Code: {baud_code:02X})")
+        # 写入寄存器 0x0005
+        self._write_single_register(0x0005, baud_code)
+        self.logger.info("Baudrate change command executed. Device LED should flash. Please update connection settings.")
+        return True
+
+    def factory_reset(self) -> bool:
+        """
+        恢复出厂设置 (通过广播地址 FF)。
+        设置地址为 01，逻辑为向 0x0004 写入 0x0002
+        """
+        self.logger.info("Sending factory reset command via broadcast address FF...")
+        # 广播指令通常无回显
+        self._write_single_register(0x0004, 0x0002, slave_id=0xFF)
+        self.logger.info("Factory reset command sent. Device address should be 01 now.")
+        return True
+
+    def _write_single_register(self, reg_addr: int, value: int, slave_id: Optional[int] = None) -> bool:
+        """内部辅助函数: Modbus 功能码 06 写单个寄存器"""
+        if not self.transport: return False
+
+        target_id = slave_id if slave_id is not None else self.device_id
+        msg = struct.pack('BBHH', target_id, 0x06, reg_addr, value)
+        msg += self._crc(msg)
+
+        with self.transport.lock:
+            self.transport.clear_buffer()
+            if self.debug:
+                self.logger.info(f"TX Write (Reg {reg_addr:#06x}): {msg.hex().upper()}")
+
+            self.transport.write(msg)
+
+            # 广播地址、波特率修改或厂家特定指令可能无回显
+            if target_id == 0xFF or reg_addr == 0x0005:
+                time.sleep(0.5)
+                return True
+
+            # 等待返回 (正常应返回相同报文)
+            resp = self.transport.read(len(msg))
+            if self.debug:
+                self.logger.info(f"RX Write Response: {resp.hex().upper()}")
+
+            return resp == msg
+
+    def close(self):
+        if self.transport:
+            self.transport.close()
+
+if __name__ == "__main__":
+    # 快速实例化测试
+    import logging
+    # 减少冗余日志，仅显示重要信息
+    logging.basicConfig(level=logging.INFO, format='%(levelname)s: %(message)s')
+
+    # 硬件配置 (根据实际情况修改)
+    TEST_PORT = "/dev/tty.usbserial-3110"
+    SLAVE_ID = 1
+    THRESHOLD = 300
+
+    print("\n" + "="*50)
+    print(f"  XKC RS485 传感器独立测试程序")
+    print(f"  端口: {TEST_PORT} | 地址: {SLAVE_ID} | 阈值: {THRESHOLD}")
+    print("="*50)
+
+    sensor = XKCSensorDriver(port=TEST_PORT, device_id=SLAVE_ID, threshold=THRESHOLD, debug=False)
+
+    try:
+        if sensor.transport:
+            print(f"\n开始实时连续采样测试 (持续 15 秒)...")
+            print(f"按 Ctrl+C 可提前停止\n")
+
+            start_time = time.time()
+            duration = 15
+            count = 0
+
+            while time.time() - start_time < duration:
+                count += 1
+                res = sensor.read_level()
+                if res:
+                    rssi = res['rssi']
+                    level = res['level']
+                    status_str = "【有液】" if level else "【无液】"
+                    # 使用 \r 实现单行刷新显示 (或者不刷，直接打印历史)
+                    # 为了方便查看变化，我们直接打印
+                    elapsed = time.time() - start_time
+                    print(f" [{elapsed:4.1f}s] 采样 {count:<3}: 电导率/RSSI = {rssi:<5} | 判定结果: {status_str}")
+                else:
+                    print(f" [{time.time()-start_time:4.1f}s] 采样 {count:<3}: 通信失败 (无响应)")
+
+                time.sleep(0.5) # 每秒采样 2 次
+
+            print(f"\n--- 15 秒采样测试完成 (总计 {count} 次) ---")
+
+            # [3] 测试动态修改阈值
+            print(f"\n[3] 动态修改阈值演示...")
+            new_threshold = 400
+            sensor.set_threshold(new_threshold)
+            res = sensor.read_level()
+            if res:
+                print(f"  采样 (当前阈值={new_threshold}): 电导率/RSSI = {res['rssi']:<5} | 判定结果: {'【有液】' if res['level'] else '【无液】'}")
+            sensor.set_threshold(THRESHOLD) # 还原
+
+    except KeyboardInterrupt:
+        print("\n[!] 用户中断测试")
+    except Exception as e:
+        print(f"\n[!] 测试运行出错: {e}")
+    finally:
+        sensor.close()
+        print("\n--- 测试程序已退出 ---\n")

unilabos/registry/devices/motor.yaml

@@ -0,0 +1,286 @@
+motor.zdt_x42:
+  category:
+  - motor
+  class:
+    action_value_mappings:
+      auto-enable:
+        feedback: {}
+        goal: {}
+        goal_default:
+          'on': true
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 使能或禁用电机。使能后电机进入锁轴状态，可接收运动指令；禁用后电机进入松轴状态。
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                'on':
+                  default: true
+                  type: boolean
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: enable参数
+          type: object
+        type: UniLabJsonCommand
+      auto-get_position:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 获取当前电机脉冲位置。
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result:
+              properties:
+                position:
+                  type: integer
+              type: object
+          required:
+          - goal
+          title: get_position参数
+          type: object
+        type: UniLabJsonCommand
+      auto-move_position:
+        feedback: {}
+        goal: {}
+        goal_default:
+          absolute: false
+          acceleration: 10
+          direction: CW
+          pulses: 1000
+          speed_rpm: 60
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 位置模式运行。控制电机移动到指定脉冲位置或相对于当前位置移动指定脉冲数。
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                absolute:
+                  default: false
+                  type: boolean
+                acceleration:
+                  default: 10
+                  maximum: 255
+                  minimum: 0
+                  type: integer
+                direction:
+                  default: CW
+                  enum:
+                  - CW
+                  - CCW
+                  type: string
+                pulses:
+                  default: 1000
+                  type: integer
+                speed_rpm:
+                  default: 60
+                  minimum: 0
+                  type: integer
+              required:
+              - pulses
+              - speed_rpm
+              type: object
+            result: {}
+          required:
+          - goal
+          title: move_position参数
+          type: object
+        type: UniLabJsonCommand
+      auto-move_speed:
+        feedback: {}
+        goal: {}
+        goal_default:
+          acceleration: 10
+          direction: CW
+          speed_rpm: 60
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 速度模式运行。控制电机以指定转速和方向持续转动。
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                acceleration:
+                  default: 10
+                  maximum: 255
+                  minimum: 0
+                  type: integer
+                direction:
+                  default: CW
+                  enum:
+                  - CW
+                  - CCW
+                  type: string
+                speed_rpm:
+                  default: 60
+                  minimum: 0
+                  type: integer
+              required:
+              - speed_rpm
+              type: object
+            result: {}
+          required:
+          - goal
+          title: move_speed参数
+          type: object
+        type: UniLabJsonCommand
+      auto-rotate_quarter:
+        feedback: {}
+        goal: {}
+        goal_default:
+          direction: CW
+          speed_rpm: 60
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 电机旋转 1/4 圈 (阻塞式)。
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                direction:
+                  default: CW
+                  enum:
+                  - CW
+                  - CCW
+                  type: string
+                speed_rpm:
+                  default: 60
+                  minimum: 1
+                  type: integer
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: rotate_quarter参数
+          type: object
+        type: UniLabJsonCommand
+      auto-set_zero:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 将当前电机位置设为零点。
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: set_zero参数
+          type: object
+        type: UniLabJsonCommand
+      auto-stop:
+        feedback: {}
+        goal: {}
+        goal_default: {}
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 立即停止电机运动。
+          properties:
+            feedback: {}
+            goal:
+              properties: {}
+              required: []
+              type: object
+            result: {}
+          required:
+          - goal
+          title: stop参数
+          type: object
+        type: UniLabJsonCommand
+      auto-wait_time:
+        feedback: {}
+        goal: {}
+        goal_default:
+          duration_s: 1.0
+        handles: {}
+        placeholder_keys: {}
+        result: {}
+        schema:
+          description: 等待指定时间 (秒)。
+          properties:
+            feedback: {}
+            goal:
+              properties:
+                duration_s:
+                  default: 1.0
+                  minimum: 0
+                  type: number
+              required:
+              - duration_s
+              type: object
+            result: {}
+          required:
+          - goal
+          title: wait_time参数
+          type: object
+        type: UniLabJsonCommand
+    module: unilabos.devices.motor.ZDT_X42:ZDTX42Driver
+    status_types:
+      position: int
+      status: str
+    type: python
+  config_info: []
+  description: ZDT X42 闭环步进电机驱动。支持速度运行、精确位置控制、位置查询和清零功能。适用于各种需要精确运动控制的实验室自动化场景。
+  handles: []
+  icon: ''
+  init_param_schema:
+    config:
+      properties:
+        baudrate:
+          default: 115200
+          type: integer
+        debug:
+          default: false
+          type: boolean
+        device_id:
+          default: 1
+          type: integer
+        port:
+          type: string
+        timeout:
+          default: 0.5
+          type: number
+      required:
+      - port
+      type: object
+    data:
+      properties:
+        position:
+          type: integer
+        status:
+          type: string
+      required:
+      - status
+      - position
+      type: object
+  version: 1.0.0

unilabos/registry/devices/sensor.yaml

@@ -0,0 +1,148 @@
+sensor.xkc_rs485:
+  category:
+  - sensor
+  - separator
+  class:
+    action_value_mappings:
+      auto-change_baudrate:
+        goal:
+          baud_code: 7
+        handles: {}
+        schema:
+          description: '更改通讯波特率 (设置成功后无返回，且需手动切换波特率重连)。代码表 (16进制): 05=2400, 06=4800,
+            07=9600, 08=14400, 09=19200, 0A=28800, 0C=57600, 0D=115200, 0E=128000,
+            0F=256000'
+          properties:
+            goal:
+              properties:
+                baud_code:
+                  description: '波特率代码 (例如: 7 为 9600, 13 即 0x0D 为 115200)'
+                  type: integer
+              required:
+              - baud_code
+              type: object
+        type: UniLabJsonCommand
+      auto-change_device_id:
+        goal:
+          new_id: 1
+        handles: {}
+        schema:
+          description: 修改传感器的 Modbus 从站地址
+          properties:
+            goal:
+              properties:
+                new_id:
+                  description: 新的从站地址 (1-254)
+                  maximum: 254
+                  minimum: 1
+                  type: integer
+              required:
+              - new_id
+              type: object
+        type: UniLabJsonCommand
+      auto-factory_reset:
+        goal: {}
+        handles: {}
+        schema:
+          description: 恢复出厂设置 (地址重置为 01)
+          properties:
+            goal:
+              type: object
+        type: UniLabJsonCommand
+      auto-read_level:
+        goal: {}
+        handles: {}
+        schema:
+          description: 直接读取当前液位及信号强度
+          properties:
+            goal:
+              type: object
+          type: object
+        type: UniLabJsonCommand
+      auto-set_threshold:
+        goal:
+          threshold: 300
+        handles: {}
+        schema:
+          description: 设置液位判定阈值
+          properties:
+            goal:
+              properties:
+                threshold:
+                  type: integer
+              required:
+              - threshold
+              type: object
+        type: UniLabJsonCommand
+      auto-wait_for_liquid:
+        goal:
+          target_state: true
+          timeout: 120
+        handles: {}
+        schema:
+          description: 实时检测电导率(RSSI)并等待用户指定的状态
+          properties:
+            goal:
+              properties:
+                target_state:
+                  default: true
+                  description: 目标状态 (True=有液, False=无液)
+                  type: boolean
+                timeout:
+                  default: 120
+                  description: 超时时间 (秒)
+              required:
+              - target_state
+              type: object
+        type: UniLabJsonCommand
+      auto-wait_level:
+        goal:
+          level: true
+          timeout: 10
+        handles: {}
+        schema:
+          description: 等待液位达到目标状态
+          properties:
+            goal:
+              properties:
+                level:
+                  type: boolean
+                timeout:
+                  type: number
+              required:
+              - level
+              type: object
+        type: UniLabJsonCommand
+    module: unilabos.devices.separator.xkc_sensor:XKCSensorDriver
+    status_types:
+      level: bool
+      rssi: int
+    type: python
+  config_info: []
+  description: XKC RS485 非接触式液位传感器 (Modbus RTU)
+  handles: []
+  icon: ''
+  init_param_schema:
+    config:
+      properties:
+        baudrate:
+          default: 9600
+          type: integer
+        debug:
+          default: false
+          type: boolean
+        device_id:
+          default: 1
+          type: integer
+        port:
+          type: string
+        threshold:
+          default: 300
+          type: integer
+        timeout:
+          default: 3.0
+          type: number
+      required:
+      - port
+      type: object
+  version: 1.0.0

unilabos/test/experiments/xkc_sensor_test.json

@@ -0,0 +1,29 @@
+{
+    "nodes": [
+        {
+            "id": "Liquid_Sensor_1",
+            "name": "XKC Sensor",
+            "children": [],
+            "parent": null,
+            "type": "device",
+            "class": "sensor.xkc_rs485",
+            "position": {
+                "x": 0,
+                "y": 0,
+                "z": 0
+            },
+            "config": {
+                "port": "/dev/tty.usbserial-3110",
+                "baudrate": 9600,
+                "device_id": 1,
+                "threshold": 300,
+                "timeout": 3.0
+            },
+            "data": {
+                "level": false,
+                "rssi": 0
+            }
+        }
+    ],
+    "links": []
+}

unilabos/test/experiments/zdt_motor_test.json

@@ -0,0 +1,28 @@
+{
+    "nodes": [
+        {
+            "id": "ZDT_Motor",
+            "name": "ZDT Motor",
+            "children": [],
+            "parent": null,
+            "type": "device",
+            "class": "motor.zdt_x42",
+            "position": {
+                "x": 0,
+                "y": 0,
+                "z": 0
+            },
+            "config": {
+                "port": "/dev/tty.usbserial-3110",
+                "baudrate": 115200,
+                "device_id": 1,
+                "debug": true
+            },
+            "data": {
+                "position": 0,
+                "status": "idle"
+            }
+        }
+    ],
+    "links": []
+}